- How to choose the anti-static floor mat in the production workshop?
-
Issue time:2023-02-17 11:03:27 source:安珂工業地墊 views:5422
Anti-static floor mat is mainly used at the entrance or buffer zone of the space that needs to be dustproof and anti-static. Its function is to quickly and effectively remove the dust attached to the bottom of the transport tools and shoes and keep the environment clean. So how to choose the antistatic floor mat used in the production workshop? The details are as follows.
The anti-static table mat shall be paved to make the ESDS tweezers, tools, appliances, instruments, etc. in contact with the human body and the table reach the uniform potential and release static electricity. At the same time, the electrostatic sensitive device (SSD) shall not be disturbed by the electrostatic discharge phenomenon such as friction electrification, so as to achieve the effect of electrostatic protection. It has a wide range of applications, and can be used in the production of table mats, work floor mats, electronic maintenance table mats, assembly line tables and other scenes.
Anti-static floor mat of Anke workshop
Skill 1. Selection method of anti-static floor mat in production workshop
1. Select wear-resistant and adhesive products. The combination of multiple layers of film makes the floor mat more adhesive to dust.
2. The surface of the floor mat shall be made of anti-static PVC material with anti-static warning signs, which naturally forms an anti-static protection area. PVC is a vinyl polymer, and its material is an amorphous material. PVC materials are often added with stabilizers, lubricants, auxiliary processing agents, pigments, impact agents and other additives in actual use. It has non-flammability, high strength, weather resistance and excellent geometric stability. The anti-static floor mat can absorb the dust brought by the shoe sole by adding anti-static materials to ensure the sanitation of the working environment.
3. With special structure, it can effectively cushion foot pressure and relieve fatigue. The middle layer is made of sponge material, such as EPDM sponge, and the middle layer is made of sponge to make feet feel comfortable. The floor mat added with sponge can enhance the anti-fatigue effect of anti-static floor mat.
4. Anti-static PVC material is selected for the surface of the bottom conductive rubber pad to prevent the floating of a large amount of dust on the ground.
5. Before bonding between layers, professional water treatment shall be used, and then environment-friendly strong adhesive shall be used for firm bonding. Cooperate with the environment-friendly 502 adhesive blank holder (the blank holder is easy to crack with universal adhesive) and adopt scientific production technology.
6. Meet the national resistance standard.
7. Anti-static floor mats with quality inspection reports shall be selected as far as possible for use in production workshops and worktops. Such floor mats have high quality, strong wear resistance and good flame retardance, making the production and operation process safer.
8. It is easy to clean and migrate without affecting the normal working environment.
2、 Instructions for use of anti-static floor mat:
1. Lay the anti-static table mat with the green side up on the operation surface or the required ground;
2. Connect the grounding wire on the anti-static platform pad with the special ground wire. If there is no special ground wire, it can be directly connected to the ground;
3. The operator shall wear anti-static wrist strap and clip it on the anti-static table mat;
4. Place the components on the anti-static table mat to start operation.
The above is the suggestion on how to select the anti-static floor mat in the production workshop. I hope you can also answer some questions about the anti-static floor mat in this process.