Issue time:2022-04-01 09:41:11 source:安珂地墊 views:1897

　　Why workshop floor protection

　　Factory in the production, processing process, dust, dust, oil, stains and other pollutants are extremely easy to form, the appearance of pollutants harm a lot, lightly affect the overall image of the factory, heavy equipment failure; at the same time, the plant often have a large load-bearing vehicles to and from the shuttle, metal components and other inadvertent fall on the ground in the handling process, etc., is very likely to cause ground damage.

　　Common ground protection program for workshop floor

　　Laying: It is necessary to send a professional flooring laying team to carry out construction for ten days or even dozens of days according to the size of the plant.

　　Maintenance: Some of the flooring is damaged and all the flooring in the workshop has to be resurfaced. The maintenance generally requires the workshop where the flooring is laid to stop working as a whole and wait for the flooring to be resurfaced, which delays the production efficiency and causes secondary economic loss.

　　Material: Due to the limitation of raw materials, the epoxy flooring has poor high temperature resistance. In daily use, the high temperature generated by the friction between the tires of forklifts and other vehicles and the epoxy flooring will discolor and damage the flooring, while its anti-corrosion performance is not ideal, and it is very easy to be corroded by chemical materials in the production process.

　　Use: Under the use environment of much water and heavy oil, the surface of epoxy flooring will become very smooth, and it is very easy to cause safety accidents in the production process.

　　"One day construction, two people installation, three minutes maintenance"

　　Ankor Neda wear-resistant and anti-slip modular splicing flooring

　　Ankor industrial safety flooring research and development team brings you a new way of workshop floor protection with "one-day construction, two-person installation and three-minute maintenance".

　　Laying: Modular interlocking structure, installation is extremely simple and convenient, only need to pre-pair the lock, and then rubber hammer to lay, general workshop scale only need two people can complete the laying in a day.

　　Maintenance: Compared with epoxy flooring repair, which requires stopping work for half a month at every turn, the modular design of wear-resistant anti-slip flooring makes the maintenance time only take three to ten minutes to change the spare piece, avoiding the secondary economic loss caused by stopping work.

　　Material: special PVC material, hard and wear-resistant, strong and durable, chemical substances corrosion resistance is very strong. Can withstand the corrosion of strong acids and most of the strong alkalis.

　　Use.

　　1. The surface bump frosted anti-slip texture design can be effective anti-slip. Even if there is some water or oil on the surface, it is not easy to slip, providing a safe and non-slip floor to ensure production safety and improve production efficiency.

　　2. The product has a strong load-bearing performance and can withstand forklifts and other operating vehicles. It can withstand the friction of tires without discoloration and damage.

　　3. Protect the epoxy flooring from damage.

　　Detail picture of NEDA products

　　Inside the factory so laid

Tag： Industrial floor matmats